Removing Punch Waste - Gestetner P7245 Hardware Manual

Troubleshooting

Removing Punch Waste

While "Empty Punch Receptacle" is displayed, you cannot use the Punch function.
A
Open the front cover of the finisher.
B
Pull out the punch waste box, and then remove punch waste.
8
C
Reinstall the punch waste box.
If you do not, "Empty Punch Receptacle" is still displayed.
D
Close the front cover of the finisher. "Empty Punch Receptacle" disappears.
114
A QV780S
AQV781S
AQV782S