Changing Names And Comments - Gestetner P7245 Hardware Manual

Monitoring and Configuring the Printer

Changing Names and Comments

Follow the procedure below to change the names and comments of the printer.
A
Start SmartDeviceMonitor for Admin.
B
On the [Group:] menu, point to [Search Device], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP SNMPv3]. A list of printers using the selected protocol ap-
pears.
Select the protocol of the printer whose configuration you want to change.
The status of printers is indicated by icons in the list.
If you are using TCP/IP SNMPv3, enter the user authentication.
C
Select a printer in the list.
D
On the [Tools] menu, click [NIB Setup Tool].
A Web browser opens and the dialog box for entering the password for the
5
Web Image Monitor administrator appears.
NIB Setup Tool starts when the network interface board is default. Follow the
instruction on the screen.
E
Enter the user name and password, and then click [Login].
Top Page of Web Image Monitor appears.
For details about the login user name and password, consult your adminis-
trator.
F
Click [Configuration].
G
Click [System] on the [Device Settings] area, and then change the settings.
H
Click [OK].
• In the [Device Name] box, enter a device name on the printer using up to 31
characters.
• In the [Comment] box, enter a comment on the printer using up to 31 char-
acters.
I
Quit Web Image Monitor.
J
Quit SmartDeviceMonitor for Admin.
172