Hold Print Job To The Printer; Printing A Hold Print File - Gestetner P7245 Hardware Manual

Other Print Operations

Hold Print Job to the Printer

The following procedure describes how to print a Hold Print file with the PCL
6/5e and the RPCS printer driver. For information about how to print a Hold
Print file with the PostScript 3 printer driver, see Postscript 3 Supplement.
Important
❒ Applications with their own drivers, such as PageMaker, do not support this
function.
A
From an application, select a command to print.
3
The [Print] dialog box appears.
B
Select the printer you want to use in the [Name] list, and then click [Properties].
The printer properties dialog box appears.
C
In the [Job type:] box, click [Hold Print].
When printing with the PostScript 3 printer driver, click [Hold Print] in the [Job
type:] box on the [Job Log] tab.
D
Click [Details...], and then enter a User ID in the [User ID:] box.
This is used to identify the user. The user ID can be entered using up to eight
alphanumeric (a-z, A-Z, 0-9) characters.
You can also set a file name. The file name you set will be displayed on the
printer's Job List screen.
E
Execute a command to print.
Make sure to set more than two copies.
The Hold Print job is sent to the printer.

Printing a Hold Print File

Important
❒ Applications with their own drivers, such as PageMaker, do not support this
function.
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} to display key [Hold Print], and then press {q Enter}
key.
C
Press the {U} or {T} to display key [Print One File], and then press {q Enter}
key.
The file name and the time when the job was stored appear.
Depending on the security settings, certain print jobs may not be displayed.
98