Paper Input Menu; Changing The Paper Input Menu - Gestetner P7245 Hardware Manual

Paper Input Menu

This section explains about paper settings on the Paper Input menu such as pa-
per sizes and types on each tray.

Changing the Paper Input Menu

AutoTray Select
Follow the procedure below to set [Aut.Tray Select].
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Paper Input], and then press the {q En-
ter} key.
C
Press the {U} or {T} key to display [Aut.Tray Select], and then press the {q
Enter} key.
D
Press the {U} or {T} key to display the tray you want to select, and then
press the {q Enter} key.
E
Press the {U} or {T} key to display [On], and then press the {q Enter} key.
Wait two seconds. The [Aut.Tray Select] screen appears.
F
Press the {On Line} key.
The initial screen appears.
Tray Priority
Follow the procedure below to change the tray priority.
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Paper Input], and then press the {q En-
ter} key.
C
Press the {U} or {T} key to display [Tray Priority], and then press the {q En-
ter} key.
D
Press the {U} or {T} key to select a tray you want to use, and then press the
{q Enter} key.
Wait two seconds. The [Paper Input] screen appears.
E
Press the {On Line} key.
The initial screen appears.
Paper Input Menu
4
125