Printer Error Recovery; Hopper Jam - DataCard RP90 User Manual

Printer error recovery

Printer error recovery

Hopper jam

52
The printer's LCD panel background color changes to red when the printer
has an error. The LCD panel displays text that describes the error.
If a card jams in the card hopper
section, "Jam (Hopper)" is displayed
on the LCD panel. To remove the
jammed card:
Pull the card hopper out and
1
lift it slightly to remove it.
2 Remove the jammed cards:
— If you can reach the
jammed card, pull it out.
— If you cannot reach the
jammed card:
— Pull the cleaning roller
module out slightly.
— Turn the knob on the
right-hand side of the
cleaning roller module
clockwise to drop the
jammed card. Remove
the fallen card.
— Push the cleaning roller
module back into
position.
Replace and close the card
3
hopper.
Press the RESET and then
4
the ENTER key to initialize the
printer.
RP90 Plus E and RL90 User Guide