DataCard RP90 User Manual page 29

Printing Preferences
The look up table requires a file with a full set of 256 values (0-255) for each plane for
Yellow, Magenta, Cyan, and Black. Each field can have a value from 0 through 255. Data
should be ASCII numeric values, separated by a comma or line feed.
To use the Security Erase feature, use a YMCK ink ribbon and choose Security Erase.
Security erase prints a random pattern using the K panel onto the transfer ribbon.
This illustration shows a printed card and the ink ribbon used to print it, without using the
Security Erase feature.
This illustration shows the same printed card and the ink ribbon used to print it, after using
the Security Erase feature.
This illustration shows the retransfer ribbon after using the Security Erase feature.
Encode tab
The Encode tab contains settings for using smart
card (IC) and magnetic stripe encoding (your ID
software might specify these settings, which
override the Encode tab). You can also specify
whether to rotate the card after an encoding step.
See
more information on encoding magnetic stripes.
RP90 Plus E and RL90 User Guide
"Magnetic Stripe Encoding" on page 77 for
23