About The Laminator; The Parts Of The Laminator - DataCard RP90 User Manual

About the laminator

About the laminator
The Datacard® RL90 card laminator is an optional laminating module that works with the
RP90 Plus E printer to add topcoat or patch material to printed cards. Holographic
laminating material is also available for added security and tamper resistance. A printed
card can be laminated manually by simply inserting it into the laminator, or automatically by
transferring the printed card from the RP90 Plus E printer to the laminator module.

The parts of the laminator

Laminator door
Laminator cartridge
Cartridge eject button
Laminator LCD panel
Power switch
Power receptacle
Printer port
Card stacker
Future expansion port
Card inlet slot
Do not connect or disconnect the laminator cable while the printer or
RP90 Plus E and RL90 User Guide
Open the door to access the laminator cartridge.
Holds the laminate material.
Press to release and remove the cartridge.
Shows the laminator status and any messages. Use it
to change laminator settings.
Press the switch to power on the laminator.
Plug in the power cord.
Connection port for the printer.
Laminated cards exit here.
Not used at this time.
Cards enter the laminator here.
CAUTION:
laminator are powered on.
5