Skipping Blank Pages - Fujitsu FI-6750S Operator's Manual

Chapter 5 Various Documents

Skipping Blank Pages

Blank pages (white or black paper) included in your document
are detected and removed automatically before scanning. For
example, when scanning both double-sided and single-sided
documents together in duplex mode, you can obtain the
scanned document images with blank pages removed from
the single-sided document scanned.
1
Load a target document on the ADF Paper Chute.
For how to load documents on the ADF Paper Chute, refer to
Loading Documents on the ADF" (on page
2
Start up ScandAll PRO, and then open the [TWAIN Driver
(32)] dialog box.
For how to open the [TWAIN Driver (32)] dialog box, refer to
3 How to Use ScandAll PRO" (on page
3
Click the [Option] button.
⇒
The [Option] dialog box appears.
4
"2.1
39).
"Chapter
51).
5
Select the [Job/Cache] tab, and then select the [Blank
Page Skip] checkbox.
If this checkbox is marked, the cache mode is automatically switched
to [Use Both Memory].
With the slider control under [Blank Page Skip], specify
the Blank Page Skip degrees.
•
In Binary/Halftone mode
The value displayed to the right of the slider bar shows a noise
(dots) ratio(*1). If a scanned page includes dots less than this
value, the page is recognized as a blank page.
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
81