Fujitsu FI-6750S Operator's Manual page 23

Chapter 1 Scanner Overview
fi-6670
fi-6670A
ADF Open Button (Common)
Opens the ADF. Push the buttons in to open the ADF.
Cable Cover (Common)
A cover to house the cablings inside to protect them.
The cables are let out from either side of the cover to avoid tangling.
CGA Board Slot (fi-6670 only)
Remove the cover to install a CGA or optional board.
The fi-6670A mounts a CGA board.
For details of the CGA board, refer to
Main Power Switch (Common)
Used to turn the scanner ON and OFF.
Power Connector (Common)
A connector for a power cable.
Ventilation Port (Common)
An open port for ventilating hot air from inside the scanner.
SCSI Connector 1 (Common)
A connector for a SCSI interface cable.
SCSI ID Switch (Common)
Used to configure a SCSI ID (ID=5 by factory setting).
USB Connector 1 (Common)
A connector for a USB interface cable.
CGA Board (fi-6670A only)
For details of the CGA board, refer to
USB Connector 2 (fi-6670A only)
A connector for a USB interface cable.
SCSI Connector 2 (fi-6670A only)
A connector for a SCSI interface cable.
"A.4 Scanner Options" (on page 195).
"A.4 Scanner Options" (on page 195).
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
23