Fujitsu FI-6750S Operator's Manual page 161

Chapter 9 Operational Settings
Item Explanation
Pre-pick To give a higher priority to
processing speed, select [Yes], if
not, select [No].
Can also be specified from the
scanner driver's setting dialog box.
Note the setting with the scanner
driver is given a priority.
Document check Selected range: Check this item
area specifica- when limiting the range of detect-
tion for Multifeed ing multifeeds. You can determine
Detection if multifeed detection is enabled or
disabled for the specified area.
Start: Specify the start point of the
check area in length (mm) from the
top edge of the document.
End: Specify the end point of the
check area in length (mm) from the
top edge of the document.
Intelligent Multi- Bypass multifeed detection by
feed Function remembering the pattern (size and
location) of glued paper on the
document.
Note that you need to select
"Check Overlapping" beforehand
by referring to
tion" (on page
Selectable Parameters
Yes/No
Check or do not check "Selected range"
Enable/Disable
(when "Selected range" is checked)
0 to 510 mm (in increments of 2 mm)
0 to 510 mm (in increments of 2 mm)
Manual Mode/Auto Mode 1/Auto Mode 2
"Multifeed Detec-
180).
Default Connection via Connection via
SCSI/USB
Connector 1
Yes: Configurable
No: Not configurable
Yes Yes No
Do not Yes Yes
check
Disable
0 mm
0 mm
Manual Yes Yes
Mode
TOP
Contents
Index
SCSI/USB
Connector 2
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
161