Fujitsu FI-6750S Operator's Manual page 160

Chapter 9 Operational Settings
Selecting each item displays detailed settings (parameters) in
the right part of the dialog box.
Item Explanation
Multifeed Select the method to detect multi-
feeds. Check either of overlapping
or document length, or both.
Can also be specified from the
scanner driver's setting dialog box.
Note the setting with the scanner
driver is given a priority.
Page Edge Filler Fill the specified width of the end
(ADF) sections on the scanned image
Page Edge Filler with white or black color.
(FB) When the backing (background)
color is white, the end sections are
filled with white; and when the
background color is black, filled
with black.
Can also be specified from the
scanner driver's setting dialog box.
Note the setting with a larger value
is given a priority.
The setting here is not applied
when Kofax VRS is used.
Dropout color Drop out a preselected color for
the scanned image (binary black &
white/grayscale mode only).
Can also be specified from the
scanner driver's setting dialog box.
Note the setting with the scanner
driver is given a priority.
Selectable Parameters
None/Check Overlapping [Ultrasonic]/
Check Length/Check Overlapping and
Length
Selectable length (to be detected as
length difference): 10, 15 or 20 mm
ADF:
Top/Left/Right: 0 to 15 mm
Bottom: -7 to 7 mm (in increments of 1
mm)
FB:
Top/Bottom/Left/Right: 0 to 15 mm
(A: Image area, B: Filled area, A+B:
Output area)
Red/Green/Blue/White
Default Connection via Connection via
SCSI/USB
Connector 1
Yes: Configurable
No: Not configurable
Check Yes Yes
Overlapping
[Ultrasonic]
Top/Bottom/ Yes No
Left/Right: 0
mm
Green Yes No
TOP
Contents
Index
Introduction
SCSI/USB
Scanner
Connector 2
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
160