Fujitsu FI-6750S Operator's Manual page 167

Chapter 9 Operational Settings
Cycle for Cleaning the Scanner
[Cleaning Cycle]
You can specify the cycle for cleaning the scanner.
If the value of the page counter (consumables counter)
exceeds a value specified here, the background color of the
counter will turn yellow. You can also specify whether or not to
receive a cleaning instruction (on page
1
Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (on page
156).
2
From the tree listing on the left, select [Device Setting 2]
[Cleaning Cycle].
3
166).
Specify a value to determine when to clean the scanner.
The specifiable value is from 1,000 to 255,000 in increments of 1,000.
You can specify whether or not to receive a cleaning instruction.
The cleaning instruction does not appear when Kofax
VRS is used.
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
167