Fujitsu FI-6750S Operator's Manual page 36

Chapter 1 Scanner Overview
Connection via SCSI/USB Connector 2
1
Turn the scanner ON.
For how to turn on the scanner, refer to
and OFF" (on page 31).
• For a SCSI cable connection, be sure to turn on your
computer AFTER turning on the scanner, and making
sure number "1" indicates on the Function Number
Display.
• Turn off the scanner and your computer first when you
switch the interface cable.
2
Load a target document on the scanner.
For how to load documents on the scanner, refer to
Loading Documents" (on page
"1.4 Turning the Scanner ON
"Chapter 2
38).
3
Launch an application you want to use for scanning.
The following steps show example windows when VCDemo is
selected.
When VCDemo is launched:
For how to launch VCDemo, refer to the the "VirtualReScan (VRS)
User's Guide" (VRS User Guide.pdf) in the folder under the path of
\VRS\HVRS\Documents in the SETUP DVD-ROM.
4
Select a scanner to use.
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
36