Fujitsu FI-6750S Operator's Manual page 99

Chapter 5 Various Documents
3
Click the [Setup] button.
⇒
The [Barcode Setting] dialog box appears.
• If scanning performance deteriorates because of the
barcodes used, limit the barcode types to sense or
narrow the barcode area to improve the scanning
performance.
• If there are multiple barcodes in the barcode detecting
area, the one recognized first will be enabled.
4
Insert the barcode-printed sheets wherever you want the
file/folder to separate.
Load the document with the barcode-printed sheets face down on the
ADF Paper Chute.
5
Barcode printed sheet
Specify the created batch profile, and then perform a
batch scan.
For how to perform a batch scan, refer to
Scan]" (on page 61).
The following procedure shows how to store each of
scanned document sheets separated with barcode-printed
sheets in separate folders, and to name the folders with
the character string recognized from the barcode:
1 On the [File format and Name scheme] tab of the
[Profile Editor] dialog box, click the [Name Rule]
button.
⇒ The [Name Rule] dialog box appears.
2 Enable [Use Barcode Characters] and select the
[Create Directories Separately] checkbox.
"3.8 Scanning with [Batch
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
TOP
Contents
Index
99