XG1200 User's Guide
5.4.17 banner
Function
Sets the banner string to display when logging in to the XG1200.
Use the no form to deter the banner string to display.
Prompt
xg(config)#
Command syntax
banner login LINE
banner login default
no banner
Parameter
login LINE
Sets a banner string.
login default
Returns the banner string to default ("XG1200 firmware identification information").
Command type
Configuration command
Default
"XG1200 firmware identification information"
The firmware identification information is the same information as displayed in FirmWare[1] or FirmWare[2] of the "
system information
Example
Set the banner string to "Welcome to XG1200."
xg(config)# banner login Welcome to XG1200
" command.
74/258
All Rights Reserved, Copyright (C) PFU LIMITED 2005
show