XG1200 User's Guide
5.14.19 clear statistics
Function
Clears all of statistics which have been stored after the startup of system hardware.
The following statistics are cleared.
Traffic statistics
QoS traffic statistics
VLAN traffic statistics : vlan-traffic-bytes and vlan-traffic-counts
Data flow statistics
Error traffic statistics : error
Prompt
xg#
Command syntax
clear statistics
Command type
Operation management command
Note
If you issue this command during execution of "monitor" command in the "current" mode, the "monitor" command may
temporarily display incorrect statistics. If it has occurred, wait until the statistics are updated automatically in the next
updating interval or reissue the "monitor" command. The "monitor" command will display the correct statistics.
Example
Clear all of statistics which have been stored after the system startup.
xg# clear statistics
: traffic-bytes, traffic-counts and framesize-traffic-counts
: qos-priority-traffic-bytes and qos-priority-traffic-counts
: dataflow
181/258
All Rights Reserved, Copyright (C) PFU LIMITED 2005