Format Of Log Message - Fujitsu XG1200 User Manual

XG1200 User's Guide

6.1.3.1 Format of Log Message

An example of the format of a log message displayed by the
xg# show log message latest 1
May 25 22:08:33 xghost xgsh: XG INFO[P4001]: cmd-exec[3388]: show log info
| | |
Month HH:MM:SS
|
Day
Month
Displays the date (month) on which the event occurred.
Day
Displays the date (day) on which the event occurred.
HH:MM:SS
Displays the time (hours:minutes:seconds) on which the event occurred.
Host name for XG1200
Displays the host name.
Function name
Indicates the function name.
Severity
Indicates the severity of the message.
−
−
−
−
Message ID
Message ID is displayed in a form that begins with an "S" or "P".
−
−
−
Message text
Displays message text.
| | |
| Function name Severity
Host name
for XG1200
CRITICAL
Indicates that the system has encountered a serious condition that prevented it from continuing its operation.
Take the appropriate action in response to the message.
ERROR
Does not stop system operation but part of the functions is inoperable. Take the appropriate action in response
to the message.
WARNING
An error or crtical condition has been detected, but it does not affect normal operation of the XG1200.
Determine whether an action must be taken by checking the message.
INFO
A message that provides information about a system status. No action is necessary.
S
A message that receives SNMP trap notification.
P
A message that does not receive SNMP trap notification.
Message number
Displays a unique number used to identify a message with the XG1200.
Verify the meaning of the message and actions to take based on the message number.
All Rights Reserved, Copyright (C) PFU LIMITED 2005
"show log" is shown below.
| |
| Message text
Message ID
212/258