Debug Platform Vlan - Cisco WS-C3560E-24PD-E Command Reference Manual

Appendix B Catalyst 3560 Switch Debug Commands

debug platform vlan

Use the debug platform vlan privileged EXEC command to enable debugging of the VLAN manager
software. Use the no form of this command to disable debugging.
Syntax Description
errors
mvid
rpc
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(19)EA1
Usage Guidelines The undebug platform vlan command is the same as the no debug platform vlan command.
Related Commands Command
show debugging
78-16405-05
debug platform vlan {errors | mvid | rpc}
no debug platform vlan {errors | mvid | rpc}
Display VLAN error debug messages.
Display mapped VLAN ID allocations and free debug messages.
Display remote procedure call (RPC) debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Catalyst 3560 Switch Command Reference
debug platform vlan
B-69