Cisco WS-C3560E-24PD-E Command Reference Manual page 481

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show ipv6 mld snooping querier command:
Switch> show ipv6 mld snooping querier
Vlan
-------------------------------------------------------------
2
This is an example of output from the show ipv6 mld snooping querier detail command:
Switch> show ipv6 mld snooping querier detail
Vlan
-------------------------------------------------------------
2
This is an example of output from the show ipv6 mld snooping querier vlan command:
Switch> show ipv6 mld snooping querier vlan 2
IP address : FE80::201:C9FF:FE40:6000
MLD version : v1
Port : Gi0/1
Max response time : 1000s
Command
Related Commands
2
ipv6 mld snooping
ipv6 mld snooping
last-listener-query-count
ipv6 mld snooping
last-listener-query-interval
ipv6 mld snooping
robustness-variable
sdm prefer
78-16405-05
IP Address
FE80::201:C9FF:FE40:6000 v1
IP Address
FE80::201:C9FF:FE40:6000 v1
MLD Version Port
Gi0/1
MLD Version Port
Gi0/1
Description
Enables and configures IPv6 MLD snooping on the switch or on
a VLAN.
Configures the maximum number of queries that the switch
sends before aging out an MLD client.
Configures the maximum response time after sending out a
query that the switch waits before deleting a port from the
multicast group.
Configures the maximum number of queries that the switch
sends before aging out a multicast address when there is no
response.
Configures an SDM template to optimize system resources
based on how the switch is being used.
Catalyst 3560 Switch Command Reference
show ipv6 mld snooping querier
2-449