Cisco WS-C3560E-24PD-E Command Reference Manual page 287

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
Examples
This example shows how to enable DSCP transparency and configure the switch to not change the DSCP
value of the incoming IP packet:
Switch(config)# mls qos
Switch(config)# no mls qos rewrite ip dscp
This example shows how to disable DSCP transparency and configure the switch to change the DSCP
value of the incoming IP packet:
Switch(config)# mls qos
Switch(config)# mls qos rewrite ip dscp
You can verify your settings by entering the show running config | include rewrite privileged EXEC
command.
Related Commands Command
mls qos
show mls qos
show running-config |
include rewrite
78-16405-05
Description
Enables QoS globally.
Displays QoS information.
Displays the DSCP transparency setting. For syntax information, select
Cisco IOS Release 12.2 Configuration Guides and Command
References > Cisco IOS Fundamentals Command Reference,
Release 12.2 > File Management Commands > Configuration File
Management Commands.
mls qos rewrite ip dscp
Catalyst 3560 Switch Command Reference
2-255