Cisco WS-C3560E-24PD-E Command Reference Manual page 568

show vlan
This is an example of output from the show vlan private-vlan command:
Switch> show vlan private-vlan
Primary Secondary Type
------- --------- ----------------- ------------------------------------------
10
10
10
20
20
20
20
2000
This is an example of output from the show vlan private-vlan type command:
Switch> show vlan private-vlan type
Vlan Type
---- -----------------
10
501
502
503
This is an example of output from the show vlan summary command:
Switch> show vlan summary
Number of existing VLANs
Number of existing VTP VLANs
Number of existing extended VLANs : 0
This is an example of output from the show vlan id command.
Switch# show vlan id 2
VLAN Name
---- -------------------------------- --------- -------------------------------
2
VLAN Type
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
2
Remote SPAN VLAN
----------------
Disabled
This is an example of output from the show vlan internal usage command. It shows that VLANs 1025
and 1026 are being used as internal VLANs for Fast Ethernet routed ports 23 and 24 on stack member 1.
If you want to use one of these VLAN IDs, you must first shut down the routed port, which releases the
internal VLAN, and then create the extended-range VLAN. When you start up the routed port, another
internal VLAN number is assigned to it.
Switch> show vlan internal usage
VLAN Usage
---- -------------
1025 FastEthernet0/23
1026 FastEthernet0/24
Catalyst 3560 Switch Command Reference
2-536
501 isolated
502 community
503 non-operational3
25 isolated
30 community
35 community
55 non-operational
2500 isolated
primary
isolated
community
normal
VLAN0200
SAID MTU
enet 100002 1500
Ports
Gi0/3
Fa0/11
-
Fa0/13, Fa0/20, Fa0/22, Gi0/1
Fa0/13, Fa0/20, Fa0/21, Gi0/1,
Fa0/13, Fa0/20, Fa0/23, Fa0/33. Gi0/1
Fa0/5, Fa0/10, Fa0/15
: 45
: 45
Status Ports
active Fa0/7, Fa0/8
Parent RingNo BridgeNo Stp
- - -
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
BrdgMode Trans1 Trans2
- - 0 0
78-16405-05