Cisco WS-C3560E-24PD-E Command Reference Manual page 275

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
Examples
This example shows how to configure the default port CoS to 4 on a port:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos trust cos
Switch(config-if)# mls qos cos 4
This example shows how to assign all the packets entering a port to the default port CoS value of 4
on a port:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos cos 4
Switch(config-if)# mls qos cos override
You can verify your settings by entering the show mls qos interface privileged EXEC command.
Related Commands Command
show mls qos interface
78-16405-05
Description
Displays quality of service (QoS) information.
Catalyst 3560 Switch Command Reference
mls qos cos
2-243