Cisco WS-C3560E-24PD-E Command Reference Manual page 470

show ipc
This example shows how to display the contents of the IPC retransmission queue:
Switch> show ipc queue
There are 0 IPC messages waiting for acknowledgement in the transmit queue.
There are 0 IPC messages waiting for a response.
There are 0 IPC messages waiting for additional fragments.
There are 0 IPC messages currently on the IPC inboundQ.
Messages currently in use
Message cache size
Maximum message cache usage
0 times message cache crossed
Emergency messages currently in use
There are 2 messages currently reserved for reply msg.
Inbound message queue depth 0
Zone inbound message queue depth 0
This example shows how to display all the IPC session statistics:
Switch# show ipc session all
Tx Sessions:
Port ID
10000.7
10000.8
Rx Sessions:
Port ID
10000.7
10000.8
Catalyst 3560 Switch Command Reference
2-438
Type Name
Unicast MDFS RP:Statistics
port_index = 0 type = Unreliable
Msgs requested = 180 Msgs returned = 180
Unicast Slot 1 :MDFS.control.RIL
port_index = 0 type = Reliable
Msgs requested = 0 Msgs returned = 0
Type Name
Unicast MDFS RP:Statistics
port_index = 0 seat_id = 0x10000
No of msgs requested = 180
Unicast Slot 1 :MDFS.control.RIL
port_index = 0 seat_id = 0x10000
No of msgs requested = 0
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
: 3
: 1000
: 1000
5000 [max]
: 0
last sent = 0
last sent = 0
last sent = 0
Msgs returned = 180
last sent = 0
Msgs returned = 0
last heard = 0
last heard = 0
last heard = 0
last heard = 0
78-16405-05