Show Platform Tcam C - Cisco WS-C3560E-24PD-E Command Reference Manual

Appendix C Catalyst 3560 Switch Show Platform Commands
Syntax Description
handle number
log-results
table {acl | all | equal-cost-route
| ipv6 {acl | qos | secondary}
local | mac-address |
multicast-expansion | qos |
secondary | station | vlan-list}
usage
[[asic number [detail [invalid]] |
[index number [detail [invalid]] |
invalid | num number [detail
[invalid]] | invalid] | [invalid] |
[num number [detail [invalid]] |
invalid]]
| begin
| exclude
| include
expression
Though visible in the command-line help strings, the usage keyword is not supported.
Note
Command Modes Privileged EXEC
78-16405-05
Display the TCAM handle. The range is 0 to 4294967295.
Display the TCAM log results.
Display lookup and forwarding table information. The keywords
have these meanings:
acl—Display the access-control list (ACL) table.
•
all—Display all the TCAM tables.
•
equal-cost-route—Display the equal-cost-route table.
•
• ipv6—Display IPv6 information.
acl—Display the IPv6 ACL-table information.
–
qos—Display the IPv6 QoS-table information.
–
secondary—Display the IPv6 secondary-table
–
information.
local—Display the local table.
•
mac-address—Display the MAC-address table.
•
multicast-expansion—Display the IPv6 multicast-expansion
•
table.
qos—Display the QoS table.
•
secondary—Display the secondary table.
•
station—Display the station table.
•
• vlan-list—Display the VLAN list table.
Display the CAM and forwarding table usage.
Display information. The keywords have these meanings:
asic number—Display information for the specified ASIC
•
device ID. The range is 0 to 15.
detail [invalid]—(Optional) Display valid or invalid details.
•
index number—(Optional) Display information for the
•
specified TCAM table index. The range is 0 to 32768.
num number—(Optional) Display information for the
•
specified TCAM table number. The range is 0 to 32768.
(Optional) Display begins with the line that matches the
expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified
expression.
Expression in the output to use as a reference point.
Catalyst 3560 Switch Command Reference
show platform tcam
C-37