Using Cisco Emf - Cisco VS-C6509E-S720-10G User Manual

Using Cisco EMF

Using Cisco EMF
The Cisco EMF Launchpad application is the main starting point for using Cisco EMF. The Launchpad
can be accessed by starting a Cisco EMF user session.
Note Before you can start a Cisco EMF user session, Cisco EMF has to be running. If a message is displayed
indicating that Cisco EMF is not running, contact the system administrator.
To start a Cisco EMF user session, do the following:
Step 1 From the command line on the terminal window, type the following:
Cisco EMF_ROOT/bin/Cisco EMF session
Replace Cisco EMF_ROOT with the root directory in which Cisco EMF is installed (for example,
Note
/opt/Cisco EMF).
The login window
Figure 3-1
Cisco 6500/7600 Series Manager User Guide
3-2
(Figure 3-1) appears.
Login Window
Chapter 3 Getting Started