Cisco VS-C6509E-S720-10G User Manual page 119

Chapter 5 Physical Object Dialog Boxes
VTT Area
The VTT area of the C6576M Chassis dialog box provides the following information:
•
•
Status Field
The Status display-only field located at the bottom of the window indicates the current state of the
object. This field can have the following values:
•
•
•
•
•
•
•
Note To collect some of the statistics in the Performance tab, the running configuration of the switch is
modified to add the following command to each interface: rmon collection stats <n> owner monitor
VTT 1 Status, VTT 2 Status, VTT 3 Status—Operational status of VTT 1, VTT 2, and VTT 3. These
attributes can have the following values:
OK—VTT is operating.
–
failed—VTT is not operating.
–
VTT 1 Outlet Temperature, VTT 2 Outlet Temperature, VTT 3 Outlet Temperature—Outlet
Temperatures of VTT 1, VTT 2, and VTT 3. These attributes can have the following values:
<n>C—Temperature in degrees Celsius.
–
– N/O—Indicates that the sensor is not operational.
– N/A—Indicates that the sensor value is not available.
decommissioned—CEMF is not actively monitoring the object attributes.
discovery—CEMF is trying to determine the contents and configuration of the Chassis object.
normal—Presence polling of the object.
performance—Attributes are collected periodically for trending purposes.
normallostcomms—CEMF lost communication with the device from the normal state.
perflostcomms—CEMF lost communication with the device from the performance state.
discoverylostcomms—CEMF lost communication with the device during discovery.
C6576M Chassis Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-5