Cisco VS-C6509E-S720-10G User Manual page 311

Chapter 6 Logical Object Dialog Boxes
Figure 6-15 Running Configuration Window Action Report
Backup/Restore Configuration Area
The Backup/Restore Configuration area of the C6576M Software dialog box provides the following
information:
•
Note The TFTP Host field must be configured in order to back up and restore the configuration. The TFTP
Host must be accessible from the managed device, and there must be sufficient disk space on the host to
store the device's startup configuration.
•
•
Note If the TFTP server is not the CEMF server, then the file specified by the Backup File field must already
exist. If it does not, the backup action will fail. If the TFTP server is the CEMF server, the file will be
automatically created.
•
•
TFTP Host—The IP address or hostname of the TFTP server that the startup or running
configurations were backed up to or restored from.
Backup Status—Status of the last backup action. This attribute (read-only) hashas the following
values:
Ok—The backup completed successfully.
–
Failed—The backup failed.
–
– Not executed—The backup operation was not executed.
Backup File—The name of the file to which the startup configuration will be copied.
Backup button—Backs up the current startup configuration to the TFTP server. The backup
filename is specified by the Backup File attribute.
Restore Status—Status of the last restore action. This attribute (read-only) has the following values:
– Ok—The restore operation completed successfully.
C6576M Software Dialog Box
Cisco 6500/7600 Series Manager User Guide
6-21