Chapter 5
Physical Object Dialog Boxes
C6576M Switch Fabric Module Dialog Box
This dialog box provides information for the Switch Fabric Modules. This dialog box can be launched
from a Chassis object or Switch Fabric Module object within the Physical view.
You can select one chassis and more than one Switch Fabric Module at a time from the object list on the
left side of the dialog box.
Details Tab
Figure 5-25
displayed in this tab are read-only.
Figure 5-25 Details Tab of the C6576M Switch Fabric Module Dialog Box
Details Area
The Details area of the C6576M Switch Fabric Module dialog box provides the following information:
•
If this attribute has a value other than ok, an alarm is generated. (See
Note
Management.")
shows the Details tab of the C6576M Switch Fabric Module dialog box. All the attributes
Operational Status—Displays the operational status of the Switch Fabric Module. This attribute has
one of the following values:
–
other—The status is unknown.
–
ok—The status is normal.
–
minorFault—There is a minor problem.
–
majorFault—There is a major problem.
C6576M Switch Fabric Module Dialog Box
Chapter 8, "Alarms and Alarm
Cisco 6500/7600 Series Manager User Guide
5-49