Starting A Cisco Emf User Session - Cisco 12000 Software Manual

Chapter 3 Getting Started
Starting Cisco EMF and Cisco 12000/10720 Router Manager
The Cisco 12000/10720 Router Manager application is viewed through the Cisco Element Management
Framework (Cisco EMF). It is important to understand how Cisco EMF works before you use the Cisco
12000/10720 Router Manager application (refer to the Cisco Element Management Framework User
Guide for further details). Cisco 12000/10720 Router Manager automatically starts when you start a
Cisco EMF user session.
Each active Cisco EMF session uses a single Cisco EMF user license.
Note
This section covers the following:
•
•
•

Starting a Cisco EMF User Session

Note Cisco EMF should already be running. When you try to invoke a Cisco EMF session, and
if you receive a message that Cisco EMF is not running, contact your system administrator,
or refer to the Cisco Element Management Framework User Guide for further details.
To start a Cisco EMF user session, proceed as follows:
From the command line on the terminal window, enter <CEMF_ROOT>
Step 1
Note
OL-4455-01
Starting a Cisco EMF User Session
Launchpad
Quitting a Cisco EMF User Session
is the Cisco EMF installation root directory (for example,
<CEMF_ROOT>
/opt/CEMF).
Starting Cisco EMF and Cisco 12000/10720 Router Manager
/bin/cemf session
Cisco 12000/10700 v3.1.1 Router Manager User Guide
3-3