Cisco VS-C6509E-S720-10G User Manual page 273

Chapter 5 Physical Object Dialog Boxes
DS-3 Far End Error Area
The DS-3 Far End Error area contains the following information:
•
•
•
•
•
SONET Path Error Area
The SONET Path Error area contains the following information:
•
•
•
•
•
•
SONET Far End Path Error Area
The SONET Far End Path Error area contains the following information:
•
•
•
•
C-bit Errored Secs—Far end C-bit errored seconds.
C-bit Severely Err Secs—Far end C-bit severely errored seconds.
C-bit Coding Violations—Far end C-bit coding violations.
Elapsed Secs—Number of seconds that have elapsed since the beginning of the far end current
error-measurement period.
Unavail Secs—Far end unavailable seconds.
SONET Path Status—Status of the SONET Path. This status may indicate multiple simultaneous
defects. There are possible Path defects:
– STS-Path Loss of Pointer
– STS-Path Alarm Indication Signal
STS-Path Remote Defect Indication
–
Unequipped
–
Signal Label Mismatch
–
SONET Path Width—Width of the SONET path. This is described by the STS-Nc SPE. A DS3
channel has a width of STS-1 (55.84 Mbps).
Errored Secs—Number of errored seconds encountered by the SONET Path in the current 15-minute
interval.
Severely Err Secs—Number of severely errored seconds encountered by the SONET Path in the
current 15-minute interval.
Coding Violations—Number of coding violations encountered by the SONET Path in the current
15-minute interval.
Unavailable Secs—Number of unavailable seconds encountered by the SONET Path in the current
15-minute interval.
Errored Secs—Number of far end errored seconds encountered by the SONET Path in the current
15-minute interval.
Severely Err Secs—Number of far end severely errored seconds encountered by the SONET Path in
the current 15-minute interval.
Coding Violations—Number of far end coding violations encountered by the SONET Path in the
current 15-minute interval.
Unavailable Secs—Number of far end unavailable seconds encountered by the SONET Path in the
current 15-minute interval.
C6576M OSM Serial Subinterface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-159