Manual Deployment - Cisco VS-C6509E-S720-10G User Manual

Chapter 4 Deploying the C65/76M
Deployment and Commissioning Process

Manual Deployment

The manual deployment method is used when discovery of the entire network is not needed and the
specific IP address and type of device that is connected to the network is known.
To manually deploy a Catalyst 6000 family switch or a Cisco 7600 series Internet Router, choose the
pop-up menu item, Deployment >Deploy Manager, from the appropriate container. The following
example describes how to manually deploy a Catalyst 6500 series switch. To manually deploy other
devices, use the pop-up menu from the other manager containers.
Choose Deployment > Deploy Catalyst 6500 Manager from the pop-up menu. This pop-up menu item,
shown in Figure 4-8, is available from the Site level in the Physical container and at the top level of the
Catalyst6500Manager container.
Figure 4-8 Pop-up Menu for Manually Deploying a C65/76M Switch Object
Cisco 6500/7600 Series Manager User Guide
4-11