Routing Protocol Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M EtherChannel Dialog Box

Routing Protocol Tab

Figure 6-47
Figure 6-47 Routing Protocol Tab of the C6576M EtherChannel Dialog Box
EIGRP Area
The EIGRP area of the C6576M EtherChannel dialog box provides the following information:
•
•
•
•
ISIS Area
The ISIS area of the C6576M EtherChannel dialog box provides the following information:
•
•
Cisco 6500/7600 Series Manager User Guide
6-58
shows the Routing Protocol tab of the C6576M EtherChannel dialog box.
EIGRP Interface Table—A list of the EIGRP processes. The following attributes can be
configured for a EIGRP process:
Bandwidth Utilization (%)—Percentage of the EtherChannel interface bandwidth that the EIGRP
protocol can use.
Hold Time (sec)—Length of time in seconds that neighbors should consider the sender valid.
Hello Interval (sec)—Interval in seconds between hello packets.
ISIS Enabled—Indicates whether or not IS-IS routing is enabled on the interface. This attribute is
read-only.
– true—IS-IS routing is enabled.
false—IS-IS routing is disabled.
–
Area Tag—The IS-IS routing area in which the interface participates. If mutli-area IS-IS is
configured on the device, the IS-IS area must be named. Otherwise, this value may be an implicit
null tag. This attribute is read-only.
Chapter 6 Logical Object Dialog Boxes