Cisco VS-C6509E-S720-10G User Manual page 193

Chapter 5 Physical Object Dialog Boxes
Interface Status Area
The Status area of the C6576M ATM T3 Interface dialog box provides the following information to
describe the general characteristics of the interface.
•
•
•
•
•
•
•
Performance Logging Area
The Performance Logging area of the C6576M ATM T3 Interface dialog box contains the buttons to
enable data logging of all the interface attributes of the interface.
•
•
Description—Comment or a description to help you remember what is attached to this interface. The
description is only put in the configuration to help you remember what specific interfaces are used
for.
Index—String index of the interface. This is a read-only attribute.
Operational Status—The current operational state of the interface. This is a read-only attribute. This
attribute has one of the following values:
– testing—Indicates that no operational packets can be passed.
unknown
–
down
–
up
–
– dormant—Interface is waiting for external actions (such as a serial line waiting for an incoming
connection)
– notPresent—Interface has missing (typically, hardware) components.
– lowerLayerDown—The interface in the lower layer is down.
Administrative Status—The desired state of the interface. This attribute has one of the following
values:
– testing (read-only)—Indicates that no operational packets can be passed.
– up
– down
Last Change—The value (in seconds) of sysUpTime at the time the interface entered its current
operational state. If the current state was entered prior to the last reinitialization of the local network
management subsystem, then this object contains a zero value. This is a read-only attribute.
Connector Present—Indication if a cable is connected to the interface. If the ifAdminStatus is down,
then this value cannot be determined and an "unknown" message is displayed. This is a read-only
attribute. This attribute can have the following values:
– yes—Cable is connected to the interface.
– no—Cable is not connected to the interface.
– unknown—Cannot determine if a cable is connected to the interface.
Number of Resets—Number of times the interface internally reset. This is a read-only attribute.
Start—Turns on performance data logging.
Stop—Turns off performance data logging.
C6576M ATM T3 Interface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-79