Configuration Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M OSM POS Interface Dialog Box

Configuration Tab

Figure 5-72
Figure 5-72 Configuration Tab of the C6576M OSM POS Interface Dialog Box
General Area
The General area contains the following information:
•
•
•
•
•
•
Note The Delay attribute is an informational parameter used only to communicate the current bandwidth to
the higher-level protocols (such as IGRP and EIGRP); you cannot adjust the actual delay of an interface
with this command.
•
Cisco 6500/7600 Series Manager User Guide
5-140
shows the Configuration tab of the C6576M OSM POS Interface dialog box.
Speed—The desired speed of the port in bits per second.
Duplex—SONET interfaces are by definition full duplex.
Link Up / Down Trap—Enables or disables linkUp and linkDown trap generation for the interface.
Input Queue Length—Displays the input queue length in packets.
Output Queue Length—Displays the output queue length in packets.
Delay—Specifies the delay in tens of microseconds for an interface or network segment.
Bandwidth—Overwrites default bandwidth in kilobits per second.
Chapter 5 Physical Object Dialog Boxes