Table of Contents
Advertisement
QOSMGR Messages
Error Message QOSMGR-3-INITIALIZING_INTERNAL_LINK_FAIL: Failed to initialize
internal link [dec].
Explanation
Recommended Action
indicate that the hardware resources are exceeded, retry the command with a smaller configuration.
Find out more about the error by using the show tech-support privileged EXEC command and by
copying the error message exactly as it appears on the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For more information about
these online tools and about contacting Cisco, see the
page
Error Message QOSMGR-4-COMMAND_FAILURE: Execution of [chars] command failed.
Explanation
possibly due to lack of hardware resources. [chars] is the description of the command.
Recommended Action
indicate that the hardware resources are exceeded, retry the command with a smaller configuration.
Find out more about the error by using the show tech-support privileged EXEC command and by
copying the error message exactly as it appears on the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For more information about
these online tools and about contacting Cisco, see the
page
Error Message QOSMGR-4-HARDWARE_PROGRAMMING_ERROR: Hardware programming error
encountered for policymap [chars].
Explanation
policy-map name.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
running-config user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
Error Message QOSMGR-4-POLICER_PLATFORM_NOT_SUPPORTED: Policer configuration has
exceeded hardware limitation for policymap [chars].
Explanation
the hardware. You configured together more policers in all policy maps (by using the police or
police aggregate policy-map class configuration command) than supported by hardware. [chars] is
the policy-map name.
Recommended Action
some interfaces.
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-64
This message means that an internal software error has occurred. [dec] is the interface.
Check if any other messages indicate resource failure. If other messages
1-3.
This message means that the command to configure a QoS setting failed. This is
Check if any other messages indicate resource failure. If other messages
1-3.
This message means that an internal software error has occurred. [chars] is the
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
This message means that the policy-map configuration has exceeded the limitation of
Reconfigure the class maps or the policy maps, or delete the policy map from
Chapter 2
Messages and Recovery Procedures
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
1-3.
OL-9641-04
Advertisement
Table of Contents
