Table of Contents
Advertisement
PM Messages
Error Message PM-4-INT_FAILUP: [chars] failed to come up. No internal VLAN available.
Explanation
therefore the interface cannot be enabled. [chars] is the interface name.
Recommended Action
configuration command to free up resources.
Error Message PM-4-INT_VLAN_NOTAVAIL: Failed to allocate internal VLAN in Port
Manager.
Explanation
Recommended Action
(such as routed ports) that require internal VLAN allocation. To delete extended-range VLANs, use
the no vlan vlan-id global configuration command. To delete a routed port, use the no switchport
interface configuration command.
Error Message PM-4-INVALID_HOST_ACCESS_ENTRY: Invalid Host access entry type ([dec])
is received.
Explanation
entry should be a configured or a dynamic type. [dec] is the entry type that is received.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
Error Message PM-4-LIMITS: The number of vlan-port instances on [chars] exceeded the
recommended limit of [dec].
Explanation
module or switch, has exceeded the recommended limit. VLANs can be counted more than once; if
VLAN 1 is carried on ten interfaces, it will count as ten VLAN ports. On some platforms bundling
is also ignored for purposes of this count; if eight interfaces on the same module are in one bundle,
and the port channel is carrying VLAN 1, it will count as eight VLAN ports. [chars] is the module
name (for example, switch or the module number), and [dec] is the recommended limit.
Recommended Action
as recommended in [dec]. Enter the show interfaces trunk privileged EXEC command to see the
total number of trunks and VLANs.
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-54
This message means that the port manager failed to allocate an internal VLAN, and
Remove the extended-range VLAN by using the no vlan vlan-id global
This message means that the port manager failed to find any available internal VLAN.
Delete some extended-range VLANs created by users, or remove some features
This message means that an invalid host access entry type was received; the host access
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
This message means that the total number of individual VLAN ports, counted over the
Reduce the number of trunks and VLANs configured in the module or switch
Chapter 2
Messages and Recovery Procedures
1-3.
OL-9641-04
Advertisement
Table of Contents
