Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message EC-5-CANNOT_BUNDLE1: Port-channel [chars] is down, port [chars] will
remain stand-alone.
Explanation
up. The first [chars] is the EtherChannel. The second [chars] is the port number.
Recommended Action
Error Message EC-5-CANNOT_BUNDLE2: [chars] is not compatible with [chars] and will
be suspended ([chars]).
Explanation
in the EtherChannel. For the interface to join the bundle (EtherChannel), change the interface
attributes to match the EtherChannel attributes. The first [chars] is the interface to be bundled, the
second [chars] is the physical interface (a switch port or a routed port) that is already in the bundle,
and the third [chars] is the reason for the incompatibility.
Recommended Action
Error Message EC-5-CANNOT_BUNDLE_LACP: [chars] is not compatible with aggregators in
channel [dec] and cannot attach to them ([chars]).
Explanation
channel. [chars] is the incompatible port. [chars] is the short interface name, such as Gi1/0/1 on a
Catalyst 3750 switch, [dec] is the channel group number, and the last [chars] is the reason.
Recommended Action
port.
Error Message EC-5-COMPATIBLE: [chars] is compatible with port-channel members.
Explanation
from those of the port channel or ports within the port channel. The system has detected that the
attributes of the port now match the port-channel attributes. [chars] is the affected port.
Recommended Action
Error Message EC-5-DONTBNDL: [chars] suspended: incompatible remote port with
[chars]
Explanation
ports in the bundle. A port can only join the bundle when the configuration of the local port and the
configuration of the remote port are the same as other ports already in the bundle. The first [chars]
is the name of the local interface that is being suspended, and the second [chars] is the name of the
local interface that is already bundled.
Recommended Action
the bundle.
OL-9641-04
The aggregation port is down. The port remains standalone until the aggregation port is
Ensure that the other ports in the bundle have the same configuration.
This message means that the interface has different interface attributes than other ports
Change the interface attributes to match the EtherChannel attributes.
The port has different port attributes than the port channel or ports within the port
For the port to join the bundle, change the port attributes so that they match the
This message means that a port was not operational because its attributes were different
No action is required.
The configuration of the remote port is different from the configuration of other remote
Make sure that the configuration of the remote ports is the same for all ports in
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
EC Messages
2-21
Advertisement
Table of Contents
