Table of Contents
Advertisement
Messages and Recovery Procedures
This chapter describes the Cisco ME 3400E, ME 3400, and ME 2400 switches system messages in
alphabetical order by facility. Note that some messages apply only to specific switches and are never
seen on the other switches.
Within each facility, the messages are listed by severity levels 0 to 7: 0 is the highest severity level, and
7 is the lowest severity level. Each message is followed by an explanation and a recommended action.
The messages listed in this chapter do not include the hostname or the date/time stamp designation that
Note
displays only if the software is configured for system log messaging.
The chapter includes these message facilities:
ACLMGR Messages, page 2-3
•
BACKUP_INTERFACE Messages, page 2-7
•
BADTRANSCEIVER Messages, page 2-7
•
BSPATCH Messages, page 2-8
•
DHCP_SNOOPING Messages, page 2-9
•
DOT1X Messages, page 2-12
•
DOT1X_SWITCH Messages, page 2-17
•
EC Messages, page 2-20
•
ETHCNTR Messages, page 2-24
•
•
FRNTEND_CTRLR Messages, page 2-25
•
GBIC_SECURITY Messages, page 2-25
•
GBIC_SECURITY_CRYPT Messages, page 2-27
GBIC_SECURITY_UNIQUE Messages, page 2-28
•
HARDWARE Messages, page 2-28
•
HCPU_PROT_MGR Messages, page 2-30
•
HLFM Messages, page 2-30
•
IDBMAN Messages, page 2-31
•
IGMP_QUERIER Messages, page 2-34
•
MAC_LIMIT Messages, page 2-35
•
OL-9641-04
(Cisco ME 3400E and ME 3400 switches only)
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2
C H A P T E R
2-1
Advertisement
Table of Contents
