Specifications - Denon AVR-4810CI Owner's Manual

Denon avr-4810ci: user guide
Hide thumbs Also See for AVR-4810CI:
Table of Contents

Advertisement

Specifications

n
Audio section
• Power amplifier
Rated output:
Front:
140 W + 140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
180 W + 180 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
180 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
140 W + 140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
180 W + 180 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back:
140 W + 140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
180 W + 180 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Front height / Front wide:
140 W + 140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
180 W + 180 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Dynamic power:
150 W x 2ch (8 Ω/ohms)
220 W x 2ch (4 Ω/ohms)
Output connectors:
6 ~ 16 Ω/ohms
• Analog
Input sensitivity / Input impedance:
200 mV / 12 kΩ/kohms (except for EXT. IN (SW / S / SB), CD, PHONO, V. AUX)
200 mV / 47 kΩ/kohms (EXT. IN (SW / S / SB), CD, PHONO, V. AUX)
Frequency response:
10 Hz ~ 100 kHz +1, –3 dB (DIRECT mode)
S/N:
102 dB (IHF–A weighted, DIRECT mode)
Distortion:
0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output:
1.2 V
• Digital
D/A output:
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Format — Digital audio interface
Digital input:
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (A weighting)
Rated output:
150 mV
Distortion factor:
0.03 % (1 kHz, 3 V)
n
Video section
• Standard video connectors
Input / output level and impedance:
1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
• S-Video connectors
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
• Color component video connector
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P
/ C
B
P
/ C
R
Frequency response:
5 Hz ~ 100 MHz — +0, –3 dB (when video convert set to "OFF")
signal — 0.7 Vp-p, 75 Ω/ohms
B
signal — 0.7 Vp-p, 75 Ω/ohms
R
n
Tuner section
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
Receiving Range:
87 .5 MHz ~ 107 .9 MHz
Usable Sensitivity:
1.0 μV (11.2 dBf)
50 dB Quieting Sensitivity:
MONO
STEREO 23 μV (38.5 dBf)
S/N (IHF-A):
MONO
STEREO 72 dB
Total harmonic Distortion (at 1 kHz):
MONO
STEREO 0.3 %
n
HD Radio section
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
Receiving Range:
87 .5 MHz ~ 107 .9 MHz
Usable Sensitivity:
1.5 µV (14.8 dBf)
S/N (IHF-A):
MONO
STEREO 68 dB
HD
Total harmonic Distortion (at 1 kHz):
MONO
STEREO 0.2 %
HD
n
Wireless LAN
Network type (wireless LAN standards): Conforming to IEEE 802.11b
Conforming to IEEE 802.11g
(Conforming to Wi-Fi ® ) z
DS-SS: 11 / 5.5 / 2 / 1 Mbps (Automatic switching)
Transfer rate:
OFDM: 54 / 48 / 36 / 24 / 18 / 12 / 9 / 6 Mbps (Automatic switching)
Security:
SSID (Network name)
WEP key (network key) (64/128 bits)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
Used frequency range:
2,412 MHz ~ 2,462 MHz
No. of channels:
Conforming to IEEE 802.11b : 11ch (DS-SS) (Of which 1 channel used)
Conforming to IEEE 802.11g : 11ch (OFDM) (Of which 1 channel used)
n
General
Power supply:
AC 120 V, 60 Hz
9.5 A
Power consumption:
0.1 W (Standby)
Maximum external dimensions:
434 (W) x 195 (H) x 424 (D) mm (17-3/32" x 7-43/64" x 16-11/16")
Weight:
19.1 kg (42 lbs 2 oz)
n
Main remote control unit (RC-1126)
Batteries:
LR6/AA Type (two batteries)
Maximum external dimensions:
63 (W) x 238 (H) x 31 (D) mm (2-31/64" x 9-3/8" x 1-7/32")
Weight:
190 g (Approx 6.7 oz) (including batteries)
n
Sub remote control unit (RC-1121)
R03/AAA Type (two batteries)
Batteries:
Maximum external dimensions:
49 (W) x 220 (H) x 24.5 (D) mm (1-59/64" x 8-21/32" x 31/32")
Weight:
114 g (Approx 4 oz) (including batteries)
z: Wi-Fi ® conformity indicates tested and proven interoperability by the "Wi-Fi Alliance" , a group certifying interoperability
among wireless LAN devices.
b For purposes of improvement, specifications and design are subject to change without notice.
[FM]
[AM]
W)
-15
520 kHz ~ 1710 kHz
19 µV
1.6 μV (15.3 dBf)
77 dB
0.2 %
[FM]
[AM]
W)
-15
530 kHz ~ 1710 kHz
20 µV
78 dB
85 dB
85 dB
0.1 %
0.02 %
0.02 %
135

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents