Denon AVR-4810CI Owner's Manual page 56

Making Other Settings (Option Setup)
OPTION
Setting items
Volume Control Volume Display : Set how volume is displayed.
Set the MAIN ZONE volume • Relative : Display ---dB (Min), in the range –80 dB ~ 18 dB.
setting. • Absolute : Display in the range 0 (Min) ~ 99.
• The "Volume Display" setting is applied also to the "Volume Limit" and
"Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Limit : Make a setting for maximum volume
• OFF : Do not set a maximum volume.
• –20dB (61) / –10dB (71) / 0dB (81)
Power On Level : Define the volume setting that is active when the
power is turned on.
• Last : Use the memorized setting from the last session.
• – – – (0) : Always use the muting on condition when power is turned on.
• –80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
• Full : The sound is muted entirely.
• –40dB : The sound is attenuated by 40 dB down.
• –20dB : The sound is attenuated by 20 dB down.
Source Delete PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX /
Remove input sources NET/USB / TUNER / XM / SIRIUS / HD Radio : Select input source that
that are not used from the is not used.
display. • ON : Use this source.
• Delete : Do not use this source.
NOTE
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected using
SELECT
.
GUI Screensaver : Make screensaver settings.
Make GUI related settings. • ON : The screen saver is activated during GUI menu display or NET/USB
/ iPod / TUNER / XM / SIRIUS / HD Radio screen display if no operation
is performed approximately for a continuous 3-minute period. When you
press uio p
that screen saver started is displayed.
• OFF : Screen saver is not activated.
Main remote control unit
operation buttons
Default settings are underlined.
Setting contents
, the screen saver is cancelled and the screen before
:Displaying the menu
Cancel the menu
Setting items
GUI Wall Paper : Set wallpaper to display the background when playback is
(Continued) stopped, etc.
•
•
•
•
Format : Set the video signal format to be output for the TV you are
using.
•
•
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text : Display the content of operation during switching of surround mode,
input mode, etc.
•
•
Master Volume : Master volume display during adjustment.
•
•
•
SOURCE
NET/USB : Set the NET/USB screen display time when the input source
is "NET/USB".
•
•
•
•
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Making Detailed Settings (Manual Setup)
Setting contents
Picture : Set the background to a picture (DENON logo).
Black : Set the background to black.
Gray : Set the background to gray.
Blue : Set the background to blue.
NTSC : Select NTSC output.
PAL : Select PAL output.
The "Format" can also be set by the following procedure. However,
the GUI screen is not displayed.
DSX
1. Press and hold the main unit's and
seconds.
"Video Format" appears on the display.
2. Press o p and set the video signal format.
ENTER MENU
3. Press the main unit's , or
setting.
NOTE
ON : Turn display on.
OFF : Turn display off.
Bottom : Display at the bottom.
Top : Display at the top.
OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
Always : Show display continuously.
30s : Show display for 30 seconds after operation.
10s : Show display for 10 seconds after operation.
OFF : Turn display off.
:Return to previous menu
RETURN
for at least 3
RETURN
to complete the
See overleaf