Denon AVR-4810CI Owner's Manual page 55

Making Detailed Settings (Manual Setup)
Making the Multi-zone Settings (Zone Setup)
Set the audio to playback with multi-zone (ZONE2, ZONE3).
Setting items
Bass –10dB ~ +10dB (0dB)
Adjust low frequency range
(bass).
Treble –10dB ~ +10dB (0dB)
Adjust high frequency range
(treble).
HPF OFF : The low range is not attenuated.
Make settings for cutting ON : The low range is attenuated.
the low range to reduce
distortion in the bass.
Lch Level –12dB ~ +12dB (0dB)
Adjust the left channel
The "Lch Level" can be set when "Channel" (vpage 52) is set to
output level.
"Stereo".
Rch Level –12dB ~ +12dB (0dB)
Adjust the right channel
The "Rch Level" can be set when "Channel" (vpage 52) is set to
output level.
"Stereo".
Channel Stereo : Select stereo output.
Set the signal output from Mono : Select mono output.
multi-zone.
When "Amp Assign" - "Assign Mode" (vpage 41) is set to "FREE",
and the signal assigned to the power amp is set to "Z2/Z3(M)", the
"Channel" setting automatically becomes "Mono".
Volume Display Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB.
Set how volume is Absolute : Display in the range 0 (Min) ~ 99.
displayed.
• The "Volume Display" setting is applied also to the "Volume Level",
"Volume Limit" and "Power On Level" display method.
• The "Volume Display" setting applies to all zones.

Main remote control unit
operation buttons
Default settings are underlined.
Setting contents
:Displaying the menu
Cancel the menu
Setting items
Volume Level
Variable : Volume adjustment enabled by main unit and remote control
Set the volume output level. unit.
–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
amplifier.
0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
amplifier.
When "Amp Assign" – "Assign Mode" (vpage 41) is set to "+Z2",
"+Z2+Z3", "ALL Z2" or "ALL Z2+Z3", the "Volume Level" setting is
automatically set to "Variable".
Volume Limit OFF : Do not set a maximum volume.
Make a setting for maximum –20dB (61) / –10dB (71) / 0dB (81)
volume.
Can be set when the multi-zone "Volume Level" setting (vpage 52)
is "Variable".
Power On Level Last : Use the memorized setting from the last session.
Define the volume setting – – – (0) : Always use the muting on condition when power is turned on.
that is active when the –80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
power is turned on.
Can be set when the multi-zone "Volume Level" setting (vpage 52)
is "Variable".
Mute Level Full : The sound is muted entirely.
Set the amount of attenuation –40dB : The sound is attenuated by 40 dB down.
when muting is on. –20dB : The sound is attenuated by 20 dB down.
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Setting contents
:Return to previous menu