Denon AVR-4810CI Owner's Manual page 70

5
[SEARCH]
Press and hold it down for a 2 seconds or
more to select the display mode.
There are two modes for display the contents recorded on the
b
iPod.
Browse mode
:
This is the mode for displaying the iPod information on the GUI
screen to operate the iPod. In this mode, you cannot perform
operations directly on the iPod itself.
z With the AVR-4810CI's display, only English letters and
�
numbers and certain symbols can be displayed. Any characters
that cannot be displayed are replaced with ". (period)".
Remote mode
:
This is the mode for performing operations directly on the iPod
itself while watching the screen displayed on the iPod. In this
mode, the GUI screen is not displayed.
z "Remote iPod" is displayed on the AVR-4810CI's display.
Display mode Browse mode
Audio file S
Playable
Picture file A
files
z1
Movie file S
Main remote
control unit
S
Active
(AVR-4810CI)
buttons
iPod ®
A
z1 : When using an ASD-11R DENON control dock for iPod.
z2 : Video may not be output, depending on the combination of
ASD-1R or ASD-11R DENON control dock for iPod and iPod.
6
Use to select the item, then press
ui
select the file to be played.
7
Press ENTER , or [1] .
p
Playback starts.
8
Adjust the items below.
Adjusting the master volume
n (vpage 85)
Selecting the surround mode
n (vpage 87)
n Adjusting the Sound and Picture Quality
(vpage 90)
To stop
n
(vpage 85)
n Stopping playback temporarily
Fast-forwarding or fast-reversing
n
To cue to the beginning of a track
n
n Playing repeatedly
Shuffling playback
n
Searching pages
n
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound
(vpage 94). The default setting is "Mode 3".
• The title name, artist name and album name can be checked by
<STATUS>
pressing during playback.
• The time (default : 30 sec) for which the GUI menus are displayed
Remote mode
can be set at "GUI" – "iPod" (vpage 54). Press
S
return to the original screen.
[POWER OFF]
• Press or
z2
S
power to the standby mode before disconnecting the iPod. Also
z2
S
switch the input source to one to which the menu "iPod" is not
assigned before disconnecting the iPod.
S
NOTE
• Depending on the type of iPod and the software version, some
S
functions may not operate.
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
ENTER or to
p
(vpage 85)
(vpage 85)
(vpage 85)
(vpage 86)
(vpage 86)
(vpage 86)
uio p
to
<ON/STANDBY>
and set the AVR-4810CI's
Viewing Videos on an iPod ® in the Browse Mode
When an iPod equipped with a video function is connected to a
DENON ASD-11R control dock for iPod, video files can be played in
the browse mode.
1
Use ui to select "Videos", then press
.
p
2
Use ui to select the search item or folder, then
press ENTER or .
p
3
Use to select the video file, then press
ui
or .
p
Playback starts.
Viewing Still Pictures and Videos on an iPod ® in
the Remote Mode
Photos and videos on an iPod ® equipped with a slide show or video
function can be played using a DENON ASD-1R or ASD-11R control
dock for iPod.
1
Press and hold [SEARCH] to set the Remote mode.
"Remote iPod" is displayed on the AVR-4810CI's display.
2
Watching the iPod's screen, use
"Photos" or "Videos".
Depending on the iPod model, it may be necessary to operate the
b
iPod unit directly.
3
Press ENTER until the image you want to view is
displayed.
"TV Out" at the iPod's "Slide show Settings" or "Video Settings"
must be set to "On" in order to display the iPod's photo data or videos
on the monitor. For details, see the iPod's operating instructions.
NOTE
Video may not be output, depending on the combination of ASD-1R or
ASD-11R DENON control dock for iPod and iPod.
Playing Components
ENTER
or
ENTER
ui to select