Setting The Power To Standby After A Certain Amount Of Time (Sleep Timer Function); Adjust The Volume Of The Speakers - Denon AVR-4810CI Owner's Manual

Convenient Functions
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
ENTER
uio p
[ [ MAIN] MAIN]
[SLEEP]
uio p
[CHANNEL LEVEL]
00
Setting the Power to Standby After a
Certain Amount of Time
(Sleep Timer Function)
BUTTON
<BUTTON>
With this function, you can set the AVR-4810CI so that the power is
[BUTTON]
automatically switched to standby after the set amount of time has
passed.
This is convenient for playing sources while going to sleep.
[SLEEP]
Press
The " " indicator on the display lights.
• The time switches as shown below each time
OFF
To cancel the sleep timer
n
[SLEEP]
Press
QUICK SELECT
The " " indicator on the display turns off.
• The sleep timer setting is canceled if the AVR-4810CI's power is set
to standby or turned off.
• The sleep timer function can be set separately for the different zones
(vpage 107 "Sleep Timer Function").
QUICK SELECT
[PARTY]
ENTER
and display the time you want to set.
[SLEEP]
is pressed.
120 min 90 min
30 min 60 min
to set "OFF".

Adjust the Volume of the Speakers

You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
Adjust the Volume of the Different Speakers
1
Press [CHANNEL LEVEL] .
2
Use ui to select the speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
3
Use o p to adjust the volume.
In the case of a subwoofer, press o when it is at "–12 dB" will
b
change the setting to "OFF".
When a headphone jack is inserted, the headphone channel level can
be adjusted.
Adjusting the Volume of Groups of Speakers
(Fader Function)
This function lets you adjust (fade) the sound from all the front (Front
speaker / Front height speaker / Front wide speaker / Center speaker)
or rear (Surround speaker / Surround Back speaker) speakers at once.
1
Use i to select "Fader", then select the item to be
adjusting using o or p .
2
Use to adjust the volume of the speakers.
o p
( o : front, p : rear)
• The fader function does not affect the subwoofer.
• The fader can be adjusted until the volume of the speaker adjusted
to the lowest value is –12 dB.