Direct Playback; Surround Mode - Denon AVR-4810CI Owner's Manual

Selecting the Surround Mode (Surround Mode)
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
DSP SIMULATION PURE DIRECT
DIRECT/STEREO
[ MAIN] PURE DIRECT
DIRECT/STEREO
DSP SIMULATION

w Playing in a DENON Original

Surround Mode

BUTTON
The desired mode according to the program source and viewing situation
<BUTTON>
can be selected from among 10 DENON original surround modes.
[BUTTON]
1
Playing the source (vpage 66).
2
Select the surround mode by pressing
SIMULATION
.
: This mode is for enjoying stereo sound from all
MULTI CH STEREO
speakers.
: This mode is for enjoying the atmosphere of
WIDE SCREEN
viewing a movie on a large screen.
: This mode is suited for viewing sports programs.
SUPER STADIUM
: This mode is for enjoying the atmosphere of a live
ROCK ARENA
concert in an arena.
: This mode is for enjoying the atmosphere of a live
JAZZ CLUB
concert in a jazz club.
: This mode is for appreciating classical concert
CLASSIC CONCERT
programs.
: This mode is for playing monaural movie sources
z
MONO MOVIE
with surround sound.
: This mode is suited for achieving surround sound
VIDEO GAME
with video games.
: This mode lets you add a sense of expansion to
MATRIX
stereo music sources.
: This mode is for enjoying surround effects using
VIRTUAL
only the front speakers or headphones.
z : When playing sources recorded in monaural in the "MONO
MOVIE" mode, the sound will be off balance with a single
channel (left or right), so input to both channels.
Depending on the program source being played, it may not be possible
to achieve a satisfactory surround effect. In this case, try other modes
to achieve a sound field suited to your tastes.
e Direct Playback
In this mode the signals bypass the tone control circuitry for high
quality sound.
The sound is output to the same channels as the input signal.
1
Playing the source (vpage 66).
2
Press DIRECT/STEREO to select the "DIRECT".
DSP
Displaying the Currently Playing Surround Mode
The indication contents of
Input signal
Analog signal /
PCM (2ch) /
Dolby Digital source / DIRECT
DTS source /
Other 2-channel digital signals
DSD (2ch) DSD DIRECT ( z )
MULTI CH DIRECT
MULTI CH DIRECT + Dolby EX
MULTI CH DIRECT + PLgx CINEMA
PCM (multi ch)
MULTI CH DIRECT + PLgx MUSIC
MULTI CH DIRECT 7 .1
DSD MULT DIRECT ( z )
DSD (multi ch)
z : When DSD signals are converted to PCM signals as set by the
audio parameters and speaker settings, "DIRECT" or "MULTI CH
DIRECT" is displayed.
For details, see page 127 .
the display