Denon AVR-4810CI Owner's Manual page 48

Setting items
2ch Direct/Stereo Crossover : Outputs at below set frequency, each speaker's bass signal
(Continued) output from the subwoofer.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
250Hz
• This can be set when "2ch Direct/Stereo" – "Subwoofer" is set to
"Yes".
• If the "2ch Direct/Stereo" – "Front" setting is "Large" and the "SW
Mode" setting is "LFE", "Full Band" is displayed and the setting cannot
be made.
Distance FL / Distance FR : Select the speaker.
• 0.0ft ~ 60.0ft (12.0ft) / 0.00m ~ 18.00m (3.60m) : Set the distance to
the speaker.
Set so that the difference between the front left speaker and front
right speaker distances is 20.0 ft (6.0 m) or less.
Level FL / Level FR : Select the speaker.
• –12.0dB ~ +12.0dB (0.0dB) : Adjust the level of each channel.
Auto Surround Mode ON : Memorize settings. Automatically play with the last used surround
Make setting for memorizing mode.
surround mode setting for OFF : Do not memorize settings. Surround mode does not change
each input signal type. according to input signal.
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals listed
below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM, DSD,
etc.)
• When playing in the PURE DIRECT, the surround mode does not change
even if the input signal is changed.
Main remote control unit
operation buttons
Setting contents
:Displaying the menu
Cancel the menu
Setting items
EQ Customize Audyssey Byp. L/R : Set when not using "Audyssey Byp L/R" equalizer.
Set so that unused equalizer • Used : Use.
settings are not displayed • Not Used : Do not use.
MULTEQ XT
when on the
Set so that "Audyssey Byp. L/R" settings can be made when Audyssey
main remote control unit is
Auto Setup is performed.
pressed.
Audyssey Flat : Set when not using "Audyssey Flat" equalizer.
• Used : Use.
• Not Used : Do not use.
Equalizer settings for which
"Not Used" is set with the
Set so that "Audyssey Flat" settings can be made when Audyssey
Quick Select function cannot
Auto Setup is performed.
be stored and called out.
Manual : Set when not using the "Manual" equalizer.
• Used : Use.
• Not Used : Do not use.
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Making Detailed Settings (Manual Setup)
Setting contents

:Return to previous menu