Denon AVR-4810CI Owner's Manual page 54

Setting items
Other Party Start Level : Make settings for volume level when the Party Mode
(Continued) is started.
• Last : The same volume as set before the party mode was started.
• – – – (0) : Always use the muting on condition when the Party Mode is
started.
• –80dB ~ 18dB (1 ~ 99) : Start party mode with your preferred volume.
• This can be set when "Party Mode Function" is set to "ON".
• This is displayed from 0 to 99 when "Volume Display" (vpage 53) is
set to "Absolute".
• You can set to the upper limit set with "Volume Limit" (vpage 53) .
Network Status : Displays up to a maximum of 10 DENON products
connected on the same network.
• Friendly Name / Model Name / Power ON/Standby / Select Source /
Volume Level / Party Mode status
"Network Status" is only displayed for DENON products supporting
the Network Status function.
Update Notification : Displays a notification message on the AVR-
4810CI's GUI screen when the latest firmware is released with "Firmware
Update". The notification message is displayed for about 20 seconds
when the power is turned on. Connect to broadband Internet (vpage
26) when using this function.
• ON : Display update message.
• OFF : Do not display update message.
• When you press
"Check for Update" screen is displayed. (Refer to page 56 for more
information on "Firmware Update".)
RETURN
• Press
Upgrade Notification : Display a notification message on the AVR-
4810CI's GUI screen when downloadable firmware is released with "Add
New Feature". The notification message is displayed for about 20 seconds
when the power is turned on. Connect to broadband Internet (vpage 26)
when using this function.
• ON : Display upgrade message.
• OFF : Do not display upgrade message.
• When you press
"Add New Feature" screen is displayed. (Refer to page 56 for more
information on "Add New Feature".)
RETURN
• Press
Main remote control unit
operation buttons
Setting contents
ENTER
during display of the notification message, the
to erase the notification message.
ENTER
during display of the notification message, the
to erase the notification message.
:Displaying the menu
Cancel the menu
Setting items
Rhapsody Account Username / Password
The types of characters that can be input are as shown below.
Set or change Username
and Password (vpage 83
GLower case charactersH abcdefghijklmnopqrstuvwxyz
"Listening to Rhapsody").
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜
GNumbersH 0123456789 (Space)
• You can change the character type when you press
remote control unit or
• The password may not contain underscores ( _ ).
Napster Account Username / Password
The types of characters that can be input are as shown below.
Set or change Username
and Password (vpage 82
GLower case charactersH abcdefghijklmnopqrstuvwxyz
"Listening to Napster").
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜
GNumbersH 0123456789 (Space)
• You can change the character type when you press
remote control unit or
• The password may not contain underscores ( _ ).
Network Information Friendly Name / Network=Wired/Wireless / SSID /
Display network information. DHCP= ON/OFF / IP Address / MAC Address
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Making Detailed Settings (Manual Setup)
Setting contents
SEARCH
on the main
MENU
during character input.
SEARCH
on the main
MENU
during character input.
:Return to previous menu