Playback Preparations; Turning The Power; Selecting The Input Source; Setting The Input Mode - Denon AVR-1708 Owner's Manual

ENGLISH
[Front)
I
N
o
:l
' "
<SOURCE SELECT> INPUT MODE MASTER VOLUME
<SOUta<PHONES>
<VIDEO
SELECT(5
~ ~
;g---c:::
I-:;OWER> <SPEAKER> BAND DIMMER
<ON/STANDBY><ANALOG><EXIT.lN> TUNING STATUS
[OFF]
( I
~
__
~~,l
[ON/SOURCE]
'©~o'
[SOURCE SELECn ----1,.". .," .. i
:© © ©,
-------- I
[TUNER]
r-GSi
[MASTER
l0TVOLUME]
[V.SELECn
~
..,,"
..::~
[MUTING]
~STATUS
I
$
I DIMMER
[MODE
---"'-~~ I [MODE
SELECTOR 1]
~"ii I
SELECTOR 2]
[Rear)
I
i-§9-9~
I
[TUNER]
[
n
'000:
SOURCE SELEC
r~-ggj
~~~:~
-t' g ] .
1
10
I BAND
About the button names in these explanations
< > : Buttons on the main unit
[ I :
Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
35
Playback
Preparations
I
Tuming the Power On
1
Press
<POWER>.
The power indicator lights red and the power is set to the standby
mode.
2
Press
<ON/STANDBY>
or
[ON/SOURCE].
The power indicator flashes green and the power turns on.
Turning the Power Off
(DPress <ON/STANDBY> or [OFF).
The power is set to the standby mode.
@Press <"OWER>.
The power indicator turns off, and so does the power.
inti.4
Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long periods
of time or when traveling, either press <POWER> to turn off the power,
or unplug the power cord from the power outlet.
Selecting the input source
Operation on the main unit
'fum
<SOURCE SELECT>.
If "Rec Select" is selected for the input source, press <SOURCE> before
turning <SOURCE SELECT>.
Operation on the main remote control unit
Press
[SOURCE SELECn.
The desired input source can be selected directly.
/Setting'the Input M.ede
i I ' : A :.
!
~;"~
Se(tffe input mode. for
thi~
Source.
' " .
~
..
::-
/ '
'
Press
INPUT MODE.
The INPUT mode indicator lights (AUTO, PCM, DTS mode).
C
AUTO - PCM DTS
~
L -
EXT IN
- 4 ' - - -
ANALOG
- 4 0 - - -
*
Press <ANALOG> to select "ANALOG ': <EXT.lN> to select" EXT IN':
[Selectable items]
AUTO :
Detect type of digital input signal and decode and play
automatically.
PCM :
Decode and play only PCM input signals.
DrS :
Decode and play only DTS input signals.
ANALOG :
Play only signals from analog input.
EXT.IN :
Play only signals from EXT. IN input.
~
• When a digital signal is properly input, the "[DIGITAU" indicator lights
on the display. If the "I
DIGITAU"
indicator does not light, check the
digital input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to "EXT.
IN':
• Only set "PCM" and "DTS" when playing the respective signals.
Operations During Playback
Adjusting the Master Volume
Either turn
<MASTER VOLUME>
or press
[MASTER
VOLUME].