Selecting The Dts Neo:6 Mode; Selecting The Neural Surround Mode; Checking The Input Signals - Denon AVR-787 Operating Instructions Manual

Basic Operation

Selecting the DTS NEO:6 mode

It is possible to play analog input signals and digital input signals (2-
channels) in the surround mode.
1
[STANDARD]
Press to select "DTS NEO:6".
DOLBY PL II x DTS NEO:6
NEURAL SURROUND
2
Play a program source.
3
SURROUND PARAMETER
Press .
4
F F G G
Press to select the play mode.
CINEMA:
This mode is optimum for playing movies. Decoding is performed
with emphasis on separation performance to achieve the same
atmosphere with 2-channel sources as with 6.1-channel sources.
MUSIC:
This mode is suited mainly for playing music.
5
D D H H
Press to select the item, then press
When "MUSIC" mode is selected:
CNTR. IMAGE:
The expansion of the center channel can be adjusted. (0.0 to 1.0,
default : 0.3)
6
ENTER SURROUND PARAMETER
Press or
3
5
(When "MUSIC" is selected)

Selecting the NEURAL SURROUND mode

It is possible to play analog input signals and digital input signals (2-
channels) in the surround mode.
This is the optimum mode for playing sources recorded in XM HD
Surround ( page 34, 35).
1
[STANDARD]
Press
DOLBY PL
NEURAL SURROUND
2
Play a program source.
3 SURROUND PARAMETER
Press
4
D D H H
Press to select the item, then press
5
ENTER SURROUND PARAMETER
Press or

Checking the input signals

F F G G
to set.
1
[ON SCREEN]
Press
SIGNAL:
Displays the type of input signal.
fs:
Displays the input signal's sampling frequency.
.
FORMAT:
Displays the input signal's number of channels (front / surround /
LFE on/off).
"SURROUND" is displayed for 2-channel signal sources recorded
in Dolby Surround.
to select "NEURAL SURROUND".
II x DTS NEO:6
.
F F G G
to set.
.
.
26
ENGLISH
OFFSET:
Displays the dialog normalization offset value.
FLAG:
"MATRIX" is displayed if the input signal has undergone matrix
processing, "DISCRETE" is displayed if the input signal has undergone
discrete processing.
2
[ON SCREEN]
Press again.
OSD-1 : Input signal
OSD-2 : Input/output settings
OSD-3 : Auto surround mode
OSD-4 ~ 6 : USER MODE 1 ~ 3
OSD-7 ~ 13 : Tuner preset stations
1
Example: Dolby Digital
• "OSD-1"-"FLAG" is not displayed if there is no FLAG identification
signal in the input signal.
• OSD-3:
This is displayed when the auto surround mode is set to "ON" (
page 52) and the input mode is set to "AUTO".
It is not displayed when the input mode is set to "ANALOG" or
"EXT. IN".
ENGLISH
Basic Operation
Example: DTS