Reset To Factory Defaults - D-Link DFL-1600 User Manual

32
3. Upgrade the Firewall Firmware
Go to the WebUI of your D-Link Firewall and navigate to Tools
Upgrade page in the toolbar. Under "Firmware Upload", click on the
"Browse" button. Select the firmware upgrade file you recently downloaded
from the D-Link support website.
Click on the "Upload Firmware" button and wait until the file is uploaded
and further instructions are shown on the page.
Caution
DO NOT ABORT THE FIRMWARE UPLOAD PROCESS.
The firmware upload may take several minutes depending on the speed of
your connection to the firewall.
6.2

Reset To Factory Defaults

There are three ways to reset the D-Link Firewall to its default firmware
and configuration.
1. Reset To Factory Defaults From the WebUI
In the WebUI of the Firewall navigate to Tools
the toolbar. Select Reset to Factory Defaults, confirm and wait for the
revert process to complete.
D-Link Firewalls User's Guide
Chapter 6. Maintenance
Reset page in