D-Link DFL-1600 User Manual page 355

Example:
Cmd> sett
Available categories in the Settings section:
IP
TCP
ICMP
ARP
State
ConnTimeouts
LengthLim
Frag
LocalReass
VLAN
SNMP
DHCPClient
DHCPRelay
DHCPServer
IPsec
Log
SSL
HA
Timesync
DNSClient
RemoteAdmin
Transparency
HTTPPoster
WWWSrv
HwPerformance - Hardware performance parameters
IfaceMon
RouteFailOver - Route Fail Over Default values
IDS
PPP
Misc
- IP (Internet Protocol) Settings
- TCP (Transmission Control Protocol) Settings
- ICMP (Internet Control Message Protocol)
- ARP (Address Resolution Protocol) Settings
- Stateful Inspection Settings
- Default Connection timeouts
- Default Length limits on Sub-IP Protocols
- Pseudo Fragment Reassembly settings
- Local Fragment Reassembly Settings
- VLAN Settings
- SNMP Settings
- DHCP (Dynamic Host Configuration Protocol)
Client Settings
- DHCP/BOOTP Relaying Settings
- DHCP Server Settings
- IPsec and IKE Settings
- Log Settings
- SSL Settings
- High Availability Settings
- Time Synchronization Settings
- DNS Client Settings
- Settings regarding remote administration
- Settings related to transparent mode
- Post user-defined URLs periodically
for e.g. dyndns registration, etc
- Settings regarding the builtin web server
- Interface Monitor
- Intrusion Detection / Prevention Settings
- PPP (L2TP/PPTP/PPPoE) Settings
- Miscellaneous Settings
D-Link Firewalls User's Guide
335